Distro	Version	Arch	Recommended EL RPMs
CentOS	5	x86_64 / i686	EL 5 (`rpm-el5-x86_64`, `rpm-el5-i686`)
CentOS	6	x86_64	EL 6 (`rpm-el6-x86_64`)
CentOS	7	x86_64 / aarch64	EL 7 (`rpm-el7-x86_64`, `rpm-el7-aarch64`)
CentOS	8	x86_64 / aarch64	EL 8 (`rpm-el8-x86_64`, `rpm-el8-aarch64`)
CentOS Stream	8	x86_64 / aarch64	EL 8 (`rpm-el8-x86_64`, `rpm-el8-aarch64`)
CentOS Stream	9	x86_64 / aarch64	EL 9 (`rpm-el9-x86_64`, `rpm-el9-aarch64`)
Rocky Linux	8	x86_64 / aarch64	EL 8 (`rpm-el8-x86_64`, `rpm-el8-aarch64`)
Rocky Linux	9	x86_64 / aarch64	EL 9 (`rpm-el9-x86_64`, `rpm-el9-aarch64`)
AlmaLinux	8	x86_64 / aarch64	EL 8 (`rpm-el8-x86_64`, `rpm-el8-aarch64`)
AlmaLinux	9	x86_64 / aarch64	EL 9 (`rpm-el9-x86_64`, `rpm-el9-aarch64`)
Oracle Linux	7	x86_64 / aarch64	EL 7 (`rpm-el7-x86_64`, `rpm-el7-aarch64`)
Oracle Linux	8	x86_64 / aarch64	EL 8 (`rpm-el8-x86_64`, `rpm-el8-aarch64`)
Oracle Linux	9	x86_64 / aarch64	EL 9 (`rpm-el9-x86_64`, `rpm-el9-aarch64`)
Amazon Linux	1	x86_64	EL 6 (`rpm-el6-x86_64`)
Amazon Linux	2	x86_64 / aarch64	EL 7 (`rpm-el7-x86_64`, `rpm-el7-aarch64`)
Amazon Linux	2023	x86_64 / aarch64	EL 9 (`rpm-el9-x86_64`, `rpm-el9-aarch64`)
UnionTech UOS	V20	x86_64 / aarch64	UOS20 (`rpm-uos20-x86_64`, `rpm-uos20-aarch64`)
openEuler	20.03	x86_64 / aarch64	EL 8 (`rpm-el8-x86_64`, `rpm-el8-aarch64`)
openEuler	22.03	x86_64 / aarch64	EL 8 (`rpm-el8-x86_64`, `rpm-el8-aarch64`)
openEuler	24.03	x86_64 / aarch64	EL 9 (`rpm-el9-x86_64`, `rpm-el9-aarch64`)
AnolisOS	7	x86_64 / aarch64	EL 7 (`rpm-el7-x86_64`, `rpm-el7-aarch64`)
AnolisOS	8	x86_64 / aarch64	EL 8 (`rpm-el8-x86_64`, `rpm-el8-aarch64`)
AnolisOS	2023	x86_64 / aarch64	EL 9 (`rpm-el9-x86_64`, `rpm-el9-aarch64`)

aarch64 RPMs are built from the same el7/ spec via aarch64_el7/8/9 Docker tags (ghcr.io/boypt/openssh-rpms:aarch64_el7 etc., QEMU-built, per-arch tags — not multi-arch manifests).

Project Structure

pullsrc.sh: Script to download source packages.
compile.sh: Script to build RPMs.
version.env: config file for variables (versions, release number, OPENSSL MODE ...)

The directory (el5, el6, el7) serve as functional templates for different environment types. The openssh.spec are modified based on the shipped spec file from OpenSSH project.

el5: Designed for legacy environments. With toolchains (Perl) to support the build process.
el6: With SysVinit startup.
el7: With Systemd service.

Note: the Systemd units in el7 are applicable not only to EL7 but also to EL8, EL9, and other modern distributions that rely on Systemd.

Current Version:

OpenSSH 10.5p1 (see: OpenSSH Official)
OpenSSL 3.5.8 (see: OpenSSL Official)

The build script reads version.env for version definitions.

OpenSSL is not needed when using WITH_OPENSSL=0. (see version.env)

Build Requirements:

yum install -y autoconf automake gcc make rpm-build pam-devel krb5-devel zlib-devel libXt-devel libX11-devel gtk2-devel perl perl-IPC-Cmd perl-Time-Piece

# For CentOS7 and above:
yum install -y systemd-devel

# For CentOS5 only:
yum install -y gcc44

libXt-devel, libX11-devel and gtk2-devel are only relevant to the EL6/EL7-era askpass subpackages — the EL8+ spec skips them (compile.sh passes no_gtk2 / skip_gnome_askpass / skip_x11_askpass = 1) and the centos-stream Dockerfile doesn't install them.

Usage

Download RPMs

Go to the Releases page and download the zip file that matches your system. No script or GitHub API needed.

Each release provides one zip per tag, named like:

openssh_<version>_<tag>.zip

e.g. openssh_v10.5p1_b1_rpm-el8-x86_64.zip.

Find your distro in the "Supported (tested) Distro" table above, and note the tag in the "Recommended EL RPMs" column (e.g. rpm-el8-x86_64).
Download the zip whose name ends with that tag.
Unzip it and install:

unzip openssh*.zip

Build RPMs

Note: It is unnecessary to build on each system, as most RPM-based Linux distributions are glibc compatible. That is, RPMs built on CentOS 8 can be installed and run on Rocky Linux 8/AlmaLinux 8/Oracle Linux 8, etc.

Install build requirements listed above.
Edit version.env file if necessary.
Download source packages.
```
./pullsrc.sh
```
if any error comes up, manually download the source files into the downloads dir.
Run the script to build RPMs.
```
./compile.sh
```
The generated RPM files will be copied to the output directory.

Use Docker

For more details, see docker/README.md

Install RPMs

ls output
# you will find multiple RPM files in this directory.
# you may copy them to other machines, and continue following steps there.

# Backup current SSH config by moving it away — the new package then
# lays down a fresh stock config, which also avoids breakage from old
# directives (notably the GSSAPI* series) removed upstream.
[[ -f /etc/ssh/sshd_config ]] && mv /etc/ssh/sshd_config /etc/ssh/sshd_config.$(date +%Y%m%d)

# Install rpm packages (`dnf` works the same on EL8/EL9).
sudo yum --disablerepo=* localinstall -y ./openssh*.rpm

# Check Installed version:
ssh -V && /usr/sbin/sshd -V

# If you skipped the backup step above, rpm kept your old config and
# saved the package defaults as sshd_config.rpmnew (the spec marks it
# %config(noreplace)). An old config can keep the new sshd from
# starting, so test it — on failure either fix the offending
# directives, or swap in the .rpmnew defaults, then re-test until it
# passes silently:
ls /etc/ssh/sshd_config.rpmnew
sudo /usr/sbin/sshd -t -f /etc/ssh/sshd_config || sudo mv /etc/ssh/sshd_config{.rpmnew,}
sudo /usr/sbin/sshd -t -f /etc/ssh/sshd_config

# Restart service
sudo systemctl restart sshd   # (`service sshd restart` also works)

# Test a new ssh connection
ssh localhost

DO NOT DISCONNECT current ssh shell yet, open a NEW shell and login to you machine to verify that sshd is working properly.

Troubleshooting

You may get complains during the yum localinstall process. It's mostly because some subpackages depend on the main openssh package, upgrading only the main package won't fit in their dependencies.

Commonly these packages are needed to be erased before installing built RPMs.

yum erase openssh-askpass openssh-keycat openssh-cavs openssh-askpass openssh-askpass-gnome openssh-debuginfo

If still not satisfied, you may try the final weapon: FORCED INSTALL.

rpm -ivh --force --nodeps --replacepkgs --replacefiles openssh-*.rpm

Rollback to distro stock OpenSSH

If the custom build doesn't work for you, remove it and reinstall the version shipped by your distro. Keep your current SSH session open until the rollback is verified.

# 1. Downgrade back to the distro's own versions in one yum transaction.
# (Single yum transaction -> dependencies are handled properly and there
# is no "RPMDB altered outside of yum" warning afterwards. If you
# installed extra subpackages, list them here too.)
sudo yum downgrade openssh openssh-clients openssh-server
# On EL8/EL9, `dnf` works the same.

# Fallback if downgrade is unavailable: erase first, then reinstall
# from the distro repos (re-enable the repos if you disabled them).
sudo rpm -e --nodeps openssh openssh-clients openssh-server
sudo yum install -y openssh openssh-clients openssh-server

# 2. Restart and verify
sudo systemctl restart sshd   # EL7 and above (systemd)
# sudo service sshd restart   # EL5/EL6 (SysVinit)
ssh -V && /usr/sbin/sshd -V
ssh localhost

Notes:

The default build bundles OpenSSL statically (WITH_OPENSSL=2), so the system OpenSSL is untouched — only the openssh packages need rolling back.
If the downgrade/install step can't find the packages, your base repos may be disabled or (on EOL releases like EL5/EL6) moved to vault — fix the repo config first.
Same rule as install: DO NOT close your current shell, open a NEW shell to verify that login works before disconnecting.

Other Notes

Built without OPENSSL

When built with WITH_OPENSSL=0, ssh-rsa keys are not supported. But the RPMs are much smaller, and the built process is much faster.

Build for uniontech UOS 20

UOS 20 kernels have a do_dup2() bug that triggers a kernel NULL pointer dereference panic when sshd re-execs:

BUG: unable to handle kernel NULL pointer dereference at 000000000000003f
IP: filp_close+0x9/0x70
Call Trace: do_dup2+xxx sys_dup2 entry_SYSCALL_64
PID: xxx Comm: sshd

To apply the workaround (el7/SOURCES/openssh-uos20-kernel-panic-fix.patch, which closes the target fd before each dup2() in sshd.c), set UOS20=1:

UOS20=1 ./compile.sh el8

The flag also prefixes PKGREL with uos20. so the resulting RPMs are distinguishable from the standard build (e.g. PKGREL 1 becomes uos20.1, producing openssh-XXXXX-uos20.1.el7.x86_64.rpm). The patch is only applied when the uos20 macro is set, so ordinary EL7/8/9 builds are unaffected. For the Docker-based build, see docker/README.md.

Install on uniontech UOS 20

UOS's openssh-help subpackage has files that conflict with the package. It's must be removed before installing the compiled RPMs:

sudo rpm --nodeps -e openssh-help
sudo yum --disablerepo=* install -y ./openssh*.rpm